View STP25NM60ND_38661.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB25NM60ND-STI25NM60ND STF/P25NM60ND-STW25NM60ND
N-channel 600 V - 0.13 - 21 A FDmeshTM II Power MOSFET D2PAK - I2PAK - TO-220FP - TO-220 - TO-247
Features
Type
www..com
VDSS @ TJMAX
RDS(on) max
ID
3
3
1 2
3 1 2
1
STB25NM60ND STI25NM60ND STF25NM60ND STP25NM60ND STW25NM60ND
650 V
0.16
21 A 21 A 21 A(1) 21 A 21 A
TO-220
D2PAK
TO-220FP
1. Limited only by maximum temperature allowed
3 12
2 1
3
The worldwide best RDS(on)*area amongst the fast recovery diode devices 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Extremely high dv/dt and avalanche capabilities Figure 1.
I2PAK
TO-247
Internal schematic diagram
Application
Switching applications
Description
The FDmeshTM II series belongs to the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced onresistance and fast switching with an intrinsic fastrecovery body diode.It is therefore strongly recommended for bridge topologies, in ZVS phase-shift converters. Table 1. Device summary
Marking 25NM60ND 25NM60ND 25NM60ND 25NM60ND 25NM60ND Rev 3 Package DPAK IPAK TO-220FP TO-220 TO-247 Packaging Tape and reel Tube Tube Tube Tube 1/18
www.st.com 18
Order codes STB25NM60ND STI25NM60ND STF25NM60ND STP25NM60ND STW25NM60ND April 2008
Contents
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................. 6
www..com
3 4 5 6
Test circuits
.............................................. 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value Parameter TO-220/D2PAK I2PAK / TO-247 600 25 21 13 84 160 40 --55 to 150 150 2500 21
(1)
Unit TO-220FP V V A A A W V/ns V C C
VDS
www..com
Drain-source voltage (VGS = 0) Gate- source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) Storage temperature Max. operating junction temperature
VGS ID ID IDM
(2)
13(1) 84(1) 40
PTOT dv/dt(3) Viso Tstg TJ
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 21 A, di/dt 600 A/s, VDD = 80% V(BR)DSS
Table 3.
Symbol Rthj-case Rthj-amb Rthj-pcb
Thermal data
Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose -62.5 -TO-220 IPAK 0.78 50 --30 TO-247 DPAK TO-220FP 3.1 62.5 -Unit C/W C/W C/W
Tl
300
C
Table 4.
Symbol IAS EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by TJ max) Single pulse avalanche energy (starting TJ = 25 C, ID = IAS, VDD = 50 V) Max value 10 850 Unit A mJ
3/18
Electrical characteristics
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
2
Electrical characteristics
(TCASE=25 C unless otherwise specified) Table 5.
Symbol
On/off states
Value Parameter Drain-source breakdown voltage Drain source voltage slope Zero gate voltage drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions Min. Typ. Max. V 48 1 100 100 3 4 0.13 5 0.16 V/ns A A nA V Unit
www..com
V(BR)DSS dv/dt(1) IDSS IGSS VGS(th) RDS(on)
ID = 1 mA, VGS = 0 VDD= 480 V, ID= 21 A, VGS= 10 V VDS = Max rating VDS = Max rating @125 C VGS = 20 V VDS = VGS, ID = 250 A VGS = 10 V, ID = 10.5 A
600
1. Characteristic value at turn off on inductive load
Table 6.
Symbol gfs
(1)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge Gate input resistance Test conditions VDS = 15 V, ID = 10.5 A VDS = 50 V, f = 1 MHz, VGS = 0 Min. Typ. 17 2400 150 15 320 60 30 50 40 80 40 15 1.6 Max. Unit S pF pF pF
Ciss Coss Crss Coss eq.(2) td(on) tr td(off) tf Qg Qgs Qgd Rg
VGS = 0, VDS = 0 to 480 V VDD = 300 V, ID = 10.5 A RG = 4.7 VGS = 10 V (see Figure 23), (see Figure 18) VDD = 480 V, ID = 21 A, VGS = 10 V, (see Figure 19) f=1 MHz Gate DC Bias=0 Test signal level = 20 mV Open drain
pF ns ns ns ns nC nC nC
1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS
4/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Electrical characteristics
Table 7.
Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM
www..com
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 21 A, VGS = 0 ISD = 21 A, VDD = 60 V di/dt=100 A/s (see Figure 20) ISD = 21 A,VDD = 60 V di/dt=100 A/s, TJ = 150 C (see Figure 20) 160 1 15 230 2 19 Test conditions Min. Typ. Max. 21 84 1.3 Unit A A V ns C A ns C A
trr Qrr IRRM
1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5%.
5/18
Electrical characteristics
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-220 / DPAK / IPAK Figure 3. Thermal impedance for TO-220 / DPAK / IPAK
www..com
Figure 4.
Safe operating area for TO-220FP
Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Safe operating area for TO-247
Figure 7.
Thermal impedance for TO-247
6/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND Figure 8. Output characteristics Figure 9.
Electrical characteristics
Transfer characteristics
www..com
Figure 10. Transconductance
Figure 11. Static drain-source on resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
7/18
Electrical characteristics
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND Figure 15. Normalized on resistance vs temperature
Figure 14. Normalized gate threshold voltage vs temperature
www..com
Figure 16. Source-drain diode forward characteristics
Figure 17. Normalized BVDSS vs temperature
8/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Test circuits
3
Test circuits
Figure 19. Gate charge test circuit
Figure 18. Switching times test circuit for resistive load
www..com
Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
9/18
Package mechanical data
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
www..com
10/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
www..com
11/18
Package mechanical data
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
TO-220FP mechanical data
mm. Min. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 Typ. Max. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
www..com
A
B
L3 L6 L7
F1 F
D
G1
E H
F2
L2
L5
123
L4
12/18
G
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Package mechanical data
TO-262 (I2PAK) mechanical data
mm. DIM. Min. A A1 b 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ. Max. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ. Max. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch
www..com
b1 c c2 D e e1 E L L1 L2
13/18
Package mechanical data
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
DPAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
www..com
0079457_M
14/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Package mechanical data
TO-247 Mechanical data
mm. Min. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 14.80 4.30 Typ Max. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75
Dim. A A1 b
www..com
b1 b2 c D E e L L1 L2 oP oR S
15/18
Packing mechanical data
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
5
Packing mechanical data
D2PAK FOOTPRINT
www..com
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
16/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
Revision history
6
Revision history
Table 8.
Date 15-Nov-2007 22-Jan-2008
Document revision history
Revision 1 2 First release. Document status promoted from target specification to preliminary data. - Updated Table 3: Thermal data on page 3; - Document status promoted from preliminary data to datasheet. Changes
www..com
08-Apr-2008
3
17/18
STP/F25NM60ND - STB25NM60ND - STI25NM60ND - STW25NM60ND
www..com
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18

▲Up To Search▲

Price & Availability of STP25NM60ND

	To Download STP25NM60ND Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .